Table of Contents
Advertisement
Status Indicator
Power Indicator
Off
Green ON
Green Blinking
Orange On
Mode Indicator
Power Indicator
Blue On
Blue Blinking
Green On
AL4608
Lighting Status
Lighting Status
Detector is OFF
Exposure is allowed
Detector is in WIFI mode switch status
Error
Client mode is enabled
1. Press and hold the Mode button for approximately
seven seconds. When the status LED indicator
starts to blink, release the button.
The Mode LED indicator blinks blue indicating that
the detector is in Client mode.
2. Press and release the Mode button. The Mode
LED indicator will blink from blue to green,
indicating that WIFI mode has switched from
Client to AP.
3. The setting will be valid if the Mode button is not
pressed again for seven seconds.
AP mode is enabled
2-13
Description
Description
Operation
2021-09-07
Advertisement
Table of Contents
