Table of Contents
Advertisement
Cleaning and Disinfection of Patient Contact Surfaces
After every examination, wipe the patient contact surfaces of the detector using
disinfectants such as ethanol, to prevent the risk of infection. For details on how to
sterilize, consult a specialist.
CAUTION:
Do not spray disinfectants or detergents directly onto the detector.
To prevent damage to the surface of the detector, wipe with a cloth slightly dampened with a
neutral detergent. Do not use solvents such as alcohol, thinner, benzene, acid and base.
It is recommended to use a waterproof non-woven cover as the isolated layer between
the detector and a patient who is bleeding.
Applied Part
The front of the detector is an applied part.
Symbols
Symbols and Conventions
Labels and Markings on the Equipment
AL4608
This indicates the name and address of the manufacturer.
This indicates the name and address of a Carestream authorized
representative in the European-Union.
Follow the instructions for use.
Handle with care.
2-2
Operation
2021-09-07
Advertisement
Table of Contents
