UCL SWIFT TEK-3 Training Manual page 9

NORTH AMERICA
TECHNICAL GUIDE
INTRODUCTION
The LSMM dual LED light source provides stabilized optical power levels for accurate loss measurements on
multimode fiber systems. Technicians can utilize each of the wavelengths included in this light source to reference
and test with UCL Swiftʼs optical power meters and gather measurements to meet international standards.
The LSMM provides a 2 kHz tone output which is recognized by optical power meters; the incoming 2 kHz signal
is identified and an audible alert is provided by the power meter.
Easy removal of the included SC adapter allows the light source ferrule to be cleaned, preventing
contamination of test jumpers. Additional adapters are available.
This device maintains full compliance with all FDA and CFR standards for light-emitting products.
FEATURES
Small form-factor for fast, simple testing in the field
Single output port ensures faster switching when
testing at multiple wavelengths
Combine LSMM with an optical
power meter (OPM1 pictured)
to perform insertion loss tests
on multimode fiber.
LSMM
NIST-traceable LED output
Long-lasting battery
The 2kHz tone output of the
LSMM will be recognized
by UCL Swift power meters
to provide a fast, simple
continuity test on MM fiber.
LED Light Source - MM
Dual 850/1300nm - SC Adapter (interchangeable)
Quick-change adapters allow
LSMM output to match their
users to adjust the
testing situation.