UCL SWIFT TEK-3 Training Manual page 26

OPM1
EXAMPLE 4: MULTIMODE FIBER, POINT-TO-POINT, 1 JUMPER
Fiber Type
Connectors Used
Test Jumper Setup
OPM Used
OLS Used
FIBER-UNDER-TEST
The fiber-under-test is multimode with LC connectors on
each end. In this example, the fiber-under-test is
400 meters long.
TEST JUMPER
The test jumper is a one-meter multimode fiber with SC
and LC connectors. The SC connector will be plugged
into the LSMM LED source and the LC connector will be
used to interface with the fiber-under-test.
POWER METER
The OPM1 power meter is set to the 850nm
wavelength. The 1300nm wavelength may also be
used. Always match the wavelength on the OPM1 to
the wavelength on the LSMM. The adapter on the OPM1
is the OPAL LC adapter.
LIGHT SOURCE
The LSMM LED source is set to the 850nm
wavelength. The 1300nm wavelength may also be
used. The adapter is the default OPAS SC adapter.
PAGE 8
Multimode
LC
(1) Simplex SC/LC
OPM1
LSMM
3330 Earhart Drive, Suite 208
Example 4: Multimode Fiber, Po
Example 1: Singlemode Fiber, Point-to-Po
Fiber Type
Fiber Type
Connectors Used
Connectors Used
Test Jumper Setup
Test Jumper Setup
OPM Used
OPM Used
OLS Used
OLS Used
400m Fiber
400m Fiber
DMT
DMT
|
Carrollton, TX 75006
Multimode
Singlemode
LC
LC
Single
Single
RP 460
RP 460
DLS 350
DLS 355
1m Jumper
1m Jumper
| |
Office: 972.556.0916 Fax: 972.910.8384
Fiber-Under-
The fiber-und
connectors on
be up to 250
fiber-under-te
Test Jumper
The test jump
with SC and L
be plugged in
LC connector
fiber-under-te
Pow
The
155
wav
mat
to t
ada
ada
Lig
The
155
wav
ada