Power Meter - UCL SWIFT TEK-3 Training Manual

OPM1
EXAMPLE 1: SINGLEMODE FIBER, POINT-TO-POINT, 1 JUMPER
Fiber Type
Connectors Used
Test Jumper Setup
OPM Used
OLS Used
FIBER-UNDER-TEST
The fiber-under-test is singlemode with LC connectors
on each end. The fiber-under-test may be up to 250
kilometers long. In this example, the fiber-under-test is
400 meters long.
TEST JUMPER
The test jumper is a one-meter singlemode fiber with SC
and LC connectors. The SC connector will be plugged
into the LSSM laser source and the LC connector will be
used to interface with the fiber-under-test.

POWER METER

The OPM1 power meter is set to the 1550nm
wavelength. The 1310nm wavelength may also
be used. Always match the wavelength on the OPM1
to the wavelength on the LSSM. The adapter on the
OPM1 is the OPAL LC adapter.
LIGHT SOURCE
The LSSM laser source is set to the 1550nm
wavelength. The 1310nm wavelength may also be
used. The adapter is the default OPAS SC adapter.
PAGE 2
Singlemode
LC
Simplex jumper SC/LC
OPM1
LSSM
3330 Earhart Drive, Suite 208
Example 1: Singlemode Fiber, Po
Example 1: Singlemode Fiber, Point-to-Po
Fiber Type
Fiber Type
Connectors Used
Connectors Used
Test Jumper Setup
Test Jumper Setup
OPM Used
OPM Used
OLS Used
OLS Used
400m Fiber
400m Fiber 400m Fiber
DMT
DMT
|
Carrollton, TX 75006
Singlemode
Singlemode
LC
LC
Single
Single
RP 460
RP 460
DLS 355
DLS 355
1m Jumper 1m Jumper
1m Jumper
| |
Office: 972.556.0916 Fax: 972.910.8384
Fiber-Under-
The fiber-und
connectors on
be up to 250
fiber-under-te
Test Jumper
The test jump
with SC and L
be plugged in
LC connector
fiber-under-te
Pow
The
155
wav
mat
to t
ada
ada
Lig
The
155
wav
ada