Pioneer VREC-200CH Battery Replacement

Hide thumbs Also See for VREC-200CH:

VREC-200CH – Battery Replacement

1. Using a Phillips screwdriver, remove the screws in the screw holes

2. Use a sharp but low hardness disassembly blade and disassemble the product along the

frame gap shown in the picture above

3. In order to prevent the glass lens and screen from being damaged during the battery

removal process, remove the glass lens and screen first;

Table of Contents

Need help?

Do you have a question about the VREC-200CH and is the answer not in the manual?

Page 1 VREC-200CH – Battery Replacement 1. Using a Phillips screwdriver, remove the screws in the screw holes 2. Use a sharp but low hardness disassembly blade and disassemble the product along the frame gap shown in the picture above 3. In order to prevent the glass lens and screen from being damaged during the battery...
Page 2 6. The above is the entire process of battery removal. The installation steps after battery replacement are the same as the removal steps, but the order needs to be reversed. Contact Information Pioneer Customer Support Center http://www.pioneer.eu ------------------------------------------------------------ Copyright(c) 2021 Pioneer Corporation...