Battery Removal Process; Installation Steps After Battery Replacement - Pioneer VREC-200CH Battery Replacement

4. Find the location of the battery show in the picture above, use a constant temperature
soldering iron, and remove the battery;
5. The process of removing the battery: first remove the black wire with a constant
temperature soldering iron, then remove the red wire, and finally remove the battery.
6. The above is the entire process of battery removal. The installation steps after battery
replacement are the same as the removal steps, but the order needs to be reversed.
Contact Information
Pioneer Customer Support Center
http://www.pioneer.eu
------------------------------------------------------------
Copyright(c) 2021 Pioneer Corporation