DAB+ Digital Radio Adaptor with Bluetooth SDA-11DAB Operation Manual...
Tokyo 113-0021, Japan http://www.pioneer-car.eu [*] SDA-11DAB English: Hereby, Pioneer declares that the radio equipment type [*] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.pioneer-car.eu/compliance Suomi: Pioneer vakuuttaa, että...
Internet: http://www.pioneer- car.eu/compliance Español: Por la presente, Pioneer declara que el tipo de equipo radioeléctrico [*] es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: http://www.pioneer- car.eu/compliance...
ġej: http://www.pioneer- car.eu/compliance Slovenčina: Pioneer týmto vyhlasuje, že rádiové zariadenie typu [*] je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: http://www.pioneer-car.eu/compliance Slovenščina: Pioneer potrjuje, da je tip radijske opreme [*] skladen z Direktivo 2014/53/EU.
Den fullstendige teksten i EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: http://www. pioneer-car.eu/compliance Íslenska: Hér með Pioneer lýsir yfir að tegund þráðlausan búnað [*] er í samræmi við tilskipun 2014/53/ESB. The fullur texti af ESB-samræmisyfirlýsingu er í boði á eftirfarandi veffangi: http://www.pioneer-car.eu/compliance...
For details, please refer to the operation manual stored on the website. http://www.pioneer-car.eu Before You Start Thank you for purchasing this PIONEER product. To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide.
Do not leave this product where excessive heat could cause damage. Make sure that nothing affects the operation of the air bags or vehicle operating systems, safety feature or hazard lamps. Pioneer is not liable for any damage, due to installation or use of the product.
Included in the box Main unit, DAB+ adaptor DAB+ active antenna Micro USB Power Cable 3.5mm Audio Cable Dual USB power adaptor Dash mount stand Windscreen mount stand Installation tool Cleaning wipes Safety strap Note: All accessories are designed to work specifically with SDA- 11DAB.
Antenna film Install the antenna cable behind the A-Pillar with the help of installation tool and connect it to Pioneer SDA-11DAB Do not attach the DAB+ antenna over heating wires, in a place that obstructs the driver's view, or in a place that can experience interference from metal.
Dashboard Mounting Bond strength is dependent upon the amount of adhesive-to- surface contact developed. Apply firm application pressure to develop better adhesive contact & thus improving bond strength. To obtain optimum adhesion, the dashboard bonding surfaces must be clean and dry. Application to surfaces at temperatures below 10°C (50°F) is not recommended because the adhesive becomes too firm to adhere readily.
Bluetooth is activated. DAB Traffic Announcement (TA) is activated. DAB Service Following (SF) is activated . FM transmission frequency. 87.5MHz Handsfree voice is via the car speakers. Handsfree voice through the built-in speaker. Line Out to car stereo Aux-In to the SDA-11DAB...
Operation SDA-11DAB Mount the SDA-11DAB to the windshield or dashboard. Connect the antenna to the antenna input at the back of SDA- 11DAB Connect the USB power supply cable to the back of SDA- 11DAB and the other end to the dual USB power adaptor.
Connect the supplied 3.5mm Aux cable to the “LINE OUT” connector of the SDA-11DAB and the other end of the cable into the AUX-IN input on your vehicle stereo system. Change the vehicle stereo source to AUX to enjoy audio sound from the SDA-11DAB, through your vehicle speakers.
“Updating Stations” every time you use the car DAB+ radio unless there are newly added DAB+ channels, then you may need to perform the “Updating Stations” again. Note: For normal use, you don’t have to perform the “Updating Stations” every time you use SDA-11DAB, unless there are newly...
added DAB+ channels, then you may need to perform the “Updating Stations” again. Service Information: DAB+ source: The Service Information display -The Service Information data will be displayed with scrolling text which is being broadcasted from the station. While listening to DAB+, the display will show the followings if applicable: Channel Name Multiplex Name（DLS）...
Traffic Announcements (TA) ON/OFF: Press and hold the “MENU” button to enter menu setting, select “DAB Settings” and “Traffic Announcement”, then choose “On” or “Off”. SDA-11DAB default setting for Traffic Announcements is ON. When Traffic Announcement is set to “On”, a white icon “TA”...
“Ever Scroll” If “Ever Scroll” is set to “Off”, the DLS text information will only scroll once. If it is set to “On”, the DLS text will be scrolling continuously. SDA-11DAB default setting for Ever Scroll is ON. Manage Preset Stations...
“Bluetooth” and then “On” to activate Bluetooth. A white ” will be shown at the top of the display Bluetooth icon” Press “MENU” button until you find “Bluetooth” source. In “Bluetooth” mode, press and hold the “ROTARY COMMANDER” to activate the SDA-11DAB device into...
From your phone, turn on Bluetooth and search for Bluetooth devices, a list of available Bluetooth devices will be displayed. Select “SDA-11DAB” in the device list and once connection is established, the flashing white Bluetooth icon will stop flashing and change to blue colour, indicating the “SDA-11DAB” is now connected to the phone.
Once your phone is paired to SDA-11DAB, the connection between both devices will be automatically re-established each time you enter your vehicle if SDA-11DAB is powered on. SDA-11DAB automatically connects itself to the last paired phone you used with it. If you want to connect SDA-...
“White”, “Red”, “Amber”, “Green” or “Blue”. Connecting AUX-IN audio source SDA-11DAB features a 3.5mm AUX-IN jack at the back of the device. External third party devices can be fed wirelessly* through FM transmission (*Device dependant and requires Bluetooth connection method) to your car stereo audio system, or via the Aux-In input connector.
“AUX IN” source, at the same time, the Aux-IN icon will be displayed. Connect an external audio source to the “AUX IN” jack at the back of SDA-11DAB with the provided 3.5mm audio cable. Dual USB Charger...
Pioneer website www.pioneer-car.eu to your PC. Connect SDA-11DAB to your PC using a USB cable. Press and hold the “MENU” button to enter menu setting, select “System Settings” and “Firmware Update”, then choose “Yes”, SDA- 11DAB will then appear in the PC as an external storage device, copy the firmware from your PC to SDA-11DAB.
The dual USB power adaptor is not properly installed in the car cigarette power socket. Please check the unit is turned on at the top of the SDA-11DAB. The sound is intermittent. You may be using a device, such as car digital video recorder (or Dashcam), GPS tracker, wireless phone charger or LED light inside the car that could cause interference.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners. Product Specification...