Advertisement
6) Lay the Peel-off unit on the printer temporarily, and fit the Printer Cover.
Note: When fitting the Printer Cover, prevent the harness from being trapped between the covers.
7) Fix the Printer Cover by securing 4 screws removed in Step 4.
Screw
8) Fit the Peel-off unit on the front of the printer, and insert the frame of the unit under the platen, then
secure the unit with 2 screws removed in Step 3.
9) Close the Top Cover.
The installation is now completed. Check that the Peel-off unit operates correctly.
© 2014 TOSHIBA TEC CORPORATION All Rights Reserved
1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562, JAPAN
Peel-off unit
Printer Cover
Screw
- 3 -
B-FV904T-H-QM-R
Screw
Printer Cover
PRINTED IN TAIWAN
R140423O8900-TTEC
EO2-38098
JUNE 2014
Advertisement
