Never restrict the incoming or outgoing airflow of the computer by blocking any vents or air intakes, as
●
shown in the following figure.
Setup procedures
WARNING!
Plug the power cord into an AC outlet that is easily accessible at all times.
●
Disconnect power from the computer by unplugging the power cord from the AC outlet (not by
●
unplugging the power cord from the computer).
Plug the cord into a grounded (earthed) three-pin outlet. Do not disable the power cord grounding pin
●
(for example, by attaching a two-pin adapter). The grounding pin is an important safety feature.
NOTE:
A computer with a 1125 W power supply might require more power than the typical office
environment can supply. For details, see the Site Preparation Guide for the computer at
support.
To set up the computer:
1.
Connect the mouse, keyboard, and power cord to the computer (1).
2.
Connect the monitor to the computer (2).
3.
Connect other peripheral components (such as a printer) according to the instructions included with the
device.
4.
Connect a network cable to the computer and to a network router or LAN device.
5.
Plug the computer power cord and monitor power cord into an AC outlet (3).
14
Chapter 3 Setting up the computer
To reduce the risk of electric shock or damage to your equipment, observe these practices:
http://www.hp.com/