●
For cabinet installation, ensure adequate cabinet ventilation and ensure that the ambient temperature
within the cabinet does not exceed specified limits.
●
Never restrict the incoming or outgoing airflow of the workstation by blocking any vents or air intakes,
as shown in the following figure.
Setup procedures
WARNING!
• Plug the power cord into an AC outlet that is easily accessible.
• Disconnect power from the workstation by unplugging the power cord from the AC outlet (not by
unplugging the power cord from the workstation).
• Plug the cord into a grounded (earthed) three-pin outlet. Do not disable the power cord grounding pin (for
example, by attaching a two-pin adapter). The grounding pin is an important safety feature.
To set up the workstation:
1.
Connect the mouse, keyboard, and power cord to the workstation.
2.
Connect the monitor to the workstation.
3.
Connect other peripheral components (such as a printer) according to the instructions included with the
device.
4.
Connect a network cable to the workstation and to a network router or LAN device.
5.
Plug the workstation power cord and monitor power cord into an AC outlet.
12
Chapter 3 Setting up the workstation
To reduce the risk of electric shock or damage to your equipment, observe these practices: