Visual Check; Schritt 1 - System Operation - EC POWER XRGI 6 Maintenance Instruction

VISUAL CHECK

3. VISUAL CHECK
STEP 1 – SYSTEM OPERATION
CHECKING IN THE SERVICE DATABASE
Check the runtime of the XRGI
https://service.ecpower.dk

Locate the desired XRGI ®
®
by typing the XRGI -ID or object name.
CALL DETAILS

Click on the icon List of

Click on one Time of call
Check in particular for:

most recent events/alarms.

length of operating times (under 10 minutes per start implies insuffi-
cient heat dissipation) or hydraulic problems.
STORAGE STATUS

Click on the icon Heat
status.

Check for abnormalities with the storage status of previous switching points.
Please pay special attention to the following:
 Is the TMV set point compensated (displayed as an operational set
point below the actual value)?
 Are all temperatures shown in the service database and are the figures
viable?
 Is the T-Return permanently below 65 °C (max. 70 °C)?
 The temperature difference between TMK - TLK is ≤ 8K at full load
when operationally warm?
OPERATING ANALYSIS

In the left menu, click on
fields a period for the desired operational analysis. Click on

Check for abnormalities in the operating analysis:
- Frequent faults
- Manual switching on site
- Operating time within the reference range
SOFTWARE VERSION

Check the software version of the XRGI

Whether a new software is available for the XRGI
in the service database with the icon
System list as well as
® system in the EC POWER service database –
system in the search field in the service database
calls.
to get a detailed data of that call.
Distributor, to get an overview of the storage
Operational analysis and enter in the 2 search
®
system.
® system is displayed
under System
Unit list.
Get data.
configuration,
6
Fig. 3.01
Fig. 3.02
Fig. 3.03
Fig. 3.04
Fig. 3.05
Fig. 3.06
Fig. 3.07