Schritt 5 - Oil Filter; Schritt 6 - Oil; Schritt 7 - New Spark Plugs - EC POWER XRGI 6 Maintenance Instruction

STEP 5 – OIL FILTER

Dismantle the used oil filter by an oil filter spanner.
Used filters must be disposed in accordance with the applicable country
regulations. Improper disposal of used filters represents a hazard to the
environment!

Take the new oil filter, put a little oil onto the rubber seal and tighten the oil
filter manually.
Do not use any tools to fit the oil filter as they could damage it!
STEP 6 – OIL

Add oil to the engine. Fill a maximum of
Use a funnel to fill the engine.

Check the oil level on the dipstick to ensure that the engine is not overfilled.

After checking the oil level, fasten the oil cap by a water pump pliers.
STEP 7 – NEW SPARK PLUGS
The temperatures of the spark plugs and the cylinder head have now equalised.

Fasten the new spark plugs by a torque wrench with a 20.8 mm spark plug
insert and put the spark plug cap back on.
Torque: 18 Nm.
30 litres of oil through the filler neck.
31
MAINTENANCE
Fig. 6.09
Fig. 6.10
Fig. 6.11
Fig. 6.12
Fig. 6.13