EC POWER XRGI 6 Maintenance Instruction page 48

STEP 4 – XRGI® ACCESSORIES
Q-Network modules
POS COMPONENT
1 Q-Network
2 Power factor corrector
STEP 5 – CLEANING
POS COMPONENT
1 Gas & water filter
2 XRGI ® system & components
Clean the casing of the XRGI
the casing or the plastic operating elements.
Fig. 8.11
DESCRIPTION
Inspect all Q-Network modules for correct function.
Inspect the compensator and the protection in the power factor corrector for correct
function.
DESCRIPTION
Clean the gas and water filter on the secondary circuit.
Clean the XRGI ® system and its components.
® system with a damp cloth and a little soap. Do not use any abrasive or cleaning agents that could damage
47
PREVENTIVE MAINTENANCE OF THE WEAR PARTS
Power factor corrector
Fig. 8.10