EC POWER XRGI 6 Maintenance Instruction page 23

MAINTENANCE

Remove the zero pressure hose from the air filter box.

Loosen the 3 bolts for the air filter box by a
remove the box together with the oil separator hose.

Pull the zero pressure hose from the vacuum filter and unscrew it from the
intake manifold by a 24 mm

Insert the new vacuum filter by a
sure hose back onto the vacuum filter.

Put the air filter box and the oil separator hose back into their positions and
fix the air filter box bolts by a

Push the gas hose onto the new injector and insert the injector into the intake
socket.

Use 2 Allen screws to fix the injector.

Fix the gas hose in place with the hose clamp by a hose clamp pliers.

Push the zero pressure hose onto the new vacuum sensor and fasten the
vacuum sensor with a 5 mm

Put the plug back onto the injector and the vacuum sensor.

Put the MGB hose back into the intake sockets and use the 2 spring hose
clamps to fix it by a hose clamp pliers.
10 mm socket spanner and
ring spanner.
24 mm ring spanner and put the zero pres-
10 mm open-end spanner.
Allen screwdriver.
22
Fig. 5.24
Fig. 5.25
Fig. 5.26
Fig. 5.27 Fig. 5.28
Fig. 5.29
Fig. 5.30