Table of Contents
Advertisement
Settings for Sound (AUDIO SETUP)
pMPEG
Selects output MPEG AUDIO signals via the DIGITAL
OUT OPTICAL and COAXIAL connectors. You cannot
select this item when you set "DIGITAL OUT" to "OFF."
• PCM: when the player is connected to an audio
component lacking a built-in MPEG decoder. If you
play MPEG AUDIO sound tracks, the player outputs
stereo signals taken from MPEG AUDIO signals via the
DIGITAL OUT OPTICAL and COAXIAL connectors.
• MPEG: when the player is connected to an audio
component having a built-in MPEG decoder.
Note
If the player is connected to an audio component lacking a
built-in MPEG decoder, do not set "MPEG" in "AUDIO
SETUP" to "MPEG." Otherwise, when you play the MPEG
AUDIO sound track, a loud noise will come out from the
speakers, affecting your ears or causing the speakers to be
damaged.
Note
The player outputs the MPEG analog audio sound only from the
front speakers when you set "DIGITAL OUT" in "AUDIO
SETUP" to "ON" and then set "MPEG" to "MPEG."
pDTS
Selects output DTS signals via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when you set "DIGITAL OUT" to "OFF."
• OFF: when the player is connected to an audio
component lacking a built-in DTS decoder.
• ON: when the player is connected to an audio
component having a built-in DTS decoder.
Note
Select the setting correctly. Otherwise, no sound or strange
sound will come out from the speakers, affecting your ears or
causing the speakers to be damaged.
• Do not play the DTS sound tracks without
connecting the player to an audio component
having a built-in DTS decoder. You cannot hear
the DTS sound unless you connect the player to
an audio component having a built-in DTS
decoder.
• When you play the DTS sound track on a CD, a
loud noise may come out from the AUDIO OUT,
5.1CH OUTPUT and PHONES connectors,
affecting your ears or causing the speakers or
headphones to be damaged.
• When you play the DTS sound track on a DVD,
no sounds will come out from the AUDIO OUT,
5.1CH OUTPUT and PHONES connectors.
60
Notes on playing the DTS sound tracks on a CD
• Do not play the DTS sound tracks without connecting the
player to an audio component having a built-in DTS decoder.
The player output the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO
SETUP" is set to "OFF" in the setup display, affecting your ears
or causing the speakers to be damaged.
• The DTS indicator on the front panel does not light up even if
the player outputs DTS signal via the DIGITAL OUT OPTICAL
and COAXIAL connectors.
• Set the sounds to "STEREO" when you play the DTS sound
tracks on a CD. (See "Changing the Sounds" on page 33.) If
you set the sounds to "1/L" or "2/R", no sounds will come out
from the DIGITAL OUT OPTICAL and COAXIAL connectors.
Notes on playing the DTS sound tracks on a DVD
• No sounds will come out from the AUDIO OUT and PHONES
connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set "DTS" in "DIGITAL OUT" to
"ON" in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
• When you set "DTS" in "AUDIO SETUP" to "OFF", no sound
will come out from the DIGITAL OUT OPTICAL and
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
Hide quick links:
Advertisement
Table of Contents
