Checking For Shut Eyes - Canon PowerShot SX30 IS User Manual

You can also set the flash output. Press the n button and choose
•
[Flash Control] (p. 98) from the 4 tab. Then choose [Flash Output] and
press the qr buttons to choose a setting.
In M and B modes, you can set the flash output if you press the
•
n button and choose the 4 tab, then [Flash Control] and set the
[Flash Mode] option to [Manual].
When you press and hold the h button for 1 sec. or more, or with the
•
flash raised, if you press the h button and immediately press the n
button, the settings screen will appear.

Checking for Shut Eyes

When the camera detects the possibility that people have their eyes shut,
appears.
or $ mode, when the number of shots is set to two or more, this
• In
function is only available for the last image shot.
• In and
shot.
Not available in W,
•
Make the setting.
● Press the qr buttons or turn the  dial to
choose the amount of flash output, then
press the m button.
Once set, ~ will appear on the screen.
Choose [Blink Detection].
● Press the n button, then choose
[Blink Detection] in the 4 tab. Press the
qr buttons to choose [On].
Shoot.
When a person with shut eyes is detected,
a frame and
modes, this function is only available for the last image
, or mode.
Checking for Shut Eyes
appear.
101