Using The Lens Hood (Sold Separately) - Canon PowerShot SX30 IS User Manual

Do not unplug the plug or power cord with the camera turned on. This
could erase images you have taken or damage the camera.

Using the Lens Hood (Sold Separately)

When shooting a wide-angle photo that is backlit without using a flash, we
recommend attaching Lens Hood LH-DC60 to reduce the amount of
extraneous light entering the lens.
If you use the built-in flash with the hood attached, portions of the image
may appear darker.
Using the Lens Hood (Sold Separately)
Attach the hood.
●
Align the notch (
the mark on the camera (
lens hood in the direction of the arrow until
locked.
●
To remove the lens hood, turn it in the
opposite direction.
●
When not in use, align the notch (
the hood with the mark on the camera
( ), and turn the hood in the direction of
the arrow until locked as shown.
) on the lens hood with
), and turn the
) on
167