(with terminal cover) Neck Strap* Lens Cap* (with cord) * For attachment instructions, refer to the Camera User Guide that can be downloaded from the Canon website. • Printed matter is also included. • A memory card is not included.
Manuals and Software You can download manuals and software from the following URL: http://www.canon.com/icpd/ With a computer connected to the Internet, access the above URL. Access the site for your country or region. Adobe Reader is required to view the manuals.
Initial Preparations Inserting the Battery Pack and Memory Card Open the cover. ( 2 ) Slide the switch (1) and open the cover (2). ( 1 ) Insert the battery pack. Holding the battery pack with the terminals (1) facing as shown, press the battery lock (2) in the direction of the arrow and insert the battery pack until the ( 2 )
Initial Preparations Close the cover. Lower the cover in the direction of the arrow and press it until it clicks into the closed position. If the cover will not close, make sure you inserted the battery pack facing the right way in step 2.
Initial Preparations Specify your home time zone. Press the [q][r] buttons to choose your home time zone. Press the [m] button when fi nished. After a confi rmation message, the setting screen is no longer displayed. To turn off the camera, press the ON/OFF button.
Trying the Camera Out Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specifi c scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on and enter ] mode. Press the ON/OFF button. Set the mode dial to [ Compose the shot.
Press the [a] button. After [Erase?] is displayed, press the [q][r] buttons to choose [Erase], and then press the [m] button. To ensure proper operation of this product, use of genuine Canon accessories is recommended. - Interface Cable IFC-400PCU - Stereo AV Cable AVC-DC400ST...