Canon PowerShot SX540 HS Getting Started
Hide thumbs Also See for PowerShot SX540 HS:

Advertisement

Getting Started

ENGLISH
CEL-SW2SA210

Advertisement

Table of Contents
loading

Summary of Contents for Canon PowerShot SX540 HS

  • Page 1: Getting Started

    Getting Started ENGLISH CEL-SW2SA210...
  • Page 2: Package Contents

    (with cord)* *1 Do not peel off the battery pack label. *2 For attachment instructions, refer to the Camera Use Guide that can be downloaded from the Canon website. • Printed matter is also included. • A memory card is not included.
  • Page 3: Manuals And Software

    Manuals and Software You can download the manuals and software from the following URL. http://www.canon.com/icpd/ • With a computer connected to the Internet, access the above URL. • Access the site for your country or region. • Adobe Reader is required to view the manuals.
  • Page 4: Inserting The Battery Pack And Memory Card

    Initial Preparations Inserting the Battery Pack and Memory Card Open the cover. Slide the cover (1) and open it (2). Insert the battery pack. Holding the battery pack with the terminals (1) facing as shown, press the battery lock (2) in the direction of the arrow and insert the battery pack until the lock clicks shut.
  • Page 5: Setting The Date And Time

    Initial Preparations Close the cover. Lower the cover (1) and hold it down as you slide it, until it clicks into the closed position (2). Setting the Date and Time Turn the camera on. Press the ON/OFF button. The [Date/Time] screen is displayed. Set the date and time.
  • Page 6: Display Language

    Initial Preparations Changing the Date and Time To adjust the date and time once you have set it, do the following. Press the [ ] button. Move the zoom lever to choose the [ ] tab. Press the [ ][ ] buttons to choose [Date/Time], and then press the [ ] button.
  • Page 7: Trying The Camera Out

    Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on and enter ] mode. Press the ON/OFF button. Set the mode dial to [ Compose the shot.
  • Page 8: Play Movies

    Trying the Camera Out Viewing Enter Playback mode. Press the [ ] button. Browse through your images. To view the previous or next image, press the [ ][ ] buttons. Movies are identified by a [ ] icon. To play movies, go to step 3. Play movies.
  • Page 9: Trademarks And Licensing

    Information subject to change without notice, as are product specifications and appearance. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon cannot be held liable for any loss arising from the use of this product.
  • Page 10 RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION. To ensure proper operation of this product, use of genuine Canon accessories is recommended. - Interface Cable IFC-400PCU - Stereo AV Cable AVC-DC400ST...
  • Page 11 To avoid violating WLAN regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from WLAN use in other countries and regions. Doing any of the following may incur legal penalties:...

Table of Contents