Canon PowerShot SX30 IS User Manual page 162

Changing Shooting Function Settings
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
When shooting movies, if you press the zoom lever toward j and zoom
out, the effect increases.
Registering Functions to the
• Choose
• When this
function cannot be used in the current Shooting mode or function setting.
• In , each press of the
and the white balance settings change to
In %, each press of the
•
% will appear on the screen.
• If you press the
displays will turn off. Try one of the following to restore the displays:
• Press any button other than the power button
• Change the camera's vertical or horizontal orientation
• Open and close the screen
• Raise and lower the flash
162
●
Choose [Set Shortcut button], then press
the m button.
Press the opqr buttons or turn the Â
●
dial to choose the functions to register,
then press the m button.
●
Pressing the
registered function.
if you want to return the button to default settings.
symbol is shown on the bottom right of an icon, the
button records white balance data (p. 77),
button will adjust and lock the focus, and
button in
Button
button will call up the
.
, both the screen and viewfinder