Adjusting the Flash Output
In D mode, you can choose 3 levels of flash output.
You can also set the flash output with the following methods. However, it
cannot be set with the r button when an external flash (sold separately) is
attached. In this case, set the flash output using methods with an asterisk *.
After pressing the m button, press the op buttons to choose ~, then press
•
the qr buttons or turn the Ê dial. *
Press the n button and choose [Flash Control] from the 4 tab. Then
•
choose [Flash Output] and press the qr buttons.*
Press the r button, then the n button, or press and hold the r button
•
for more than 1 second, and the setting screen will appear. Choose [Flash
Output], then press the qr buttons.
Checking for Shut Eyes
When the camera detects the possibility that people have their eyes shut,
appears.
Set the mode dial to D.
Choose the level of flash output.
●
After pressing the r button, immediately
turn the ÷ dial to choose the level of
output, then press the m button.
X
Once set, ~ will appear on the screen.
Choose [Blink Detection].
●
Press the n button, then choose
[Blink Detection] in the 4 tab. Press the
qr buttons to choose [On].
Shoot.
X
When a person with shut eyes is detected,
a frame and
appear.
111