Table of Contents
Advertisement
Getting started
PLEASE READ 'LEt'S tALk SAFEtY' At tHE BEGINNING BEFORE USE
Assembling your upright
Insert the back
The back panel will
panel into the
click into place when
floorhead.
it slides into position
as highlighted.
Align the post motor
Attach the turbo tool and
filter tabs in position
extension tube to the tool holders.
and turn clockwise to
lock into place
Clip hose into the hose
holders to secure
Insert the screw into
the back panel near
the base, use a cross-
head screwdriver to
tighten securely
Wrap the power cord around the
quick release cord hook at the top
and the lower cord hook, continue
wrapping the power cord until it
is secure
Place the post motor filter
onto the filter housing.
Attach the hose end with clip
to the handle and push until it's
secure. Insert the other end of
hose into the slot on the rear of
machine, align the tabs and turn
until it locks into place
Place the dirt container onto the
machine and push onto the back
panel to click into place
Insert handle
extension tube
into the top of the
machine and push
until it locks
into place
Advertisement
Table of Contents
