Table of Contents
Advertisement
Cleaning the shroud
Turn the dirt container lid
anti-clockwise and lift
to remove
Cleaning the post motor filter
Turn the post motor filter
cover anti-clockwise to
unlock and remove
Tap the filter over a bin to
remove the dirt.
Taking care of your machine
To gain access to the shroud,
use the tab on the filter to pull
the filter out of its housing
and remove
Grasp the tab on the top of the
filter and pull to remove
40˚C
40˚C
40˚C
MAX
MAX
MAX
Wash the filter under running
water (40 degrees max).
Tap the shroud over a bin
to remove dirt and debris
For best cleaning results filters
require cleaning at least every
3 months
Leave to fully dry for at least
24 hours before refitting back
to the vacuum
40˚C
MAX
Wash shroud under running
water and leave for a minimum of
24hours to fully dry. If the shroud
is not fitted correctly it can prevent
the dirt container closing
TIP
24hr
24hr
24hr
Advertisement
Table of Contents
