• Keep fingers, hair and loose clothing from moving parts without supervision and openings whilst using the vacuum cleaner • Only Vax recommend tools should be used with this • This appliance can be used by children aged from 8 vacuum cleaner years and above and persons with reduced physical, Don’ts...
Page 3
Maintaining your carpets will ensure they keep their appearance for longer . You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.
Contents Performance Floor2Floor Included with your machine Let’s talk safety 2 in 1 tool Getting to know your machine Getting started Pre-motor filter Using your machine Post-motor filter Taking care of your machine Floor2Floor Pet Let’s talk technical What to do if it goes wrong TurboTool Getting in touch Floor2Floor Total Home...
Getting started PLEASE READ ‘LEt’S tALk SAFEtY’ At tHE BEGINNING BEFORE USE Assembling your upright Insert the back panel Insert the lower cord Now take the small Place the dirt container onto the machine. into the floorhead hook into the hole clip and push it down Ensure the dirt container tabs line up with at the bottom of the...
Using your machine Before you begin cleaning • Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. • The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off.
Taking care of your machine Emptying and cleaning the dirt container Press dirt container release Hold the dirt container over a bin Close the base of the dirt button to remove the dirt and unclip the lock on the bottom container and click the dirt container of the dirt container, allowing the...
Taking care of your machine Cleaning the shroud 40˚C 24hr Place fingers under the Remove the pre-motor Tap the shroud over the Wash the shroud under catch of the bin to dirt filter to allow access to bin to release dirt running water and leave container lid and pull to the shroud...
Let’s talk technical Removing debris from the brushbar Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar Removing blockages from the TurboTool* Vacuuming the stairs Ensure that the vacuum is upright at the top or bottom of the stairs while...
Page 11
Let’s talk technical Changing the belt Switch off your vacuum Squeeze the sides of the Remove the floor plate Remove the belt cover cleaner at the main socket floor plate to release it and unplug. Remove the 6 screws on the bottom of the floorhead Changing the belt Lift the brush from the...
What to do if it goes wrong Problem Solution • The plug may not be fully pushed into the electrical socket • Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse Why won’t the vacuum •...
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach...
Page 16
Version 2.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the Dual Power series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.