Advertisement
INSTALLATION INSTRUCTIONS
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
R16 5TH WHEEL ROLLER
WARNINGS
Read and understand instructions before using this product.
Fully instruct and demonstrate the operation of this 5th
wheel hitch to the end user. Include the importance of
observing all warnings contained herein, including warning
labels on 5th wheel hitch mid section. Provide this manual
in its entirety to the end-user.
To avoid serious injury, do not expose hands, body parts
or clothing between the truck and trailer or the truck's bed
sides and trailer. Extreme care should be observed to avoid
serious injury to self, property and observers.
Never position yourself or others under the trailer's kingpin
area during coupling and uncoupling. Serious injury or death
may result if the warning above is not observed.
This product complies with V-5 regulations and safety
requirements for connecting devices and towing systems
of the State of Wisconsin.
• CURTMFG.COM
PAGE 1 • 16560-INS-RB • 1.877.287.8634 • NEED ASSISTANCE?
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for curt R16 5TH
Summary of Contents for curt R16 5TH
- Page 1 INSTALLATION INSTRUCTIONS WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY R16 5TH WHEEL ROLLER WARNINGS Read and understand instructions before using this product. Fully instruct and demonstrate the operation of this 5th wheel hitch to the end user. Include the importance of observing all warnings contained herein, including warning labels on 5th wheel hitch mid section.
- Page 2 UNPACKING THE ROLLER Ensure rail kits are installed Measure diagonal from same according to rail kit manufacturer's reference point. Measurement recommended specifications should be the same Inspect all parts for damage and verify that all items listed are present. NOTE: The mounting rail kit (#15) is sold separately. Each mounting rail must have a bolt Rear edge of truck bed to in either of the marked holes.
- Page 3 5TH WHEEL HEAD Step 8 Slide cross member weldment (#5) between the DS roller INSTALLATION assembly (#11), PS roller assembly (#10) and over the lock rod assembly as shown in Figure 1. Secure with 10mm flat To install the 16515 5th wheel head (Figure 6), slide the head bolts and torque to 35 foot lbs.
- Page 4 Product. CURT shall not be liable for the loss of or use of vehicles, loss of or damage to personal property, expenses such as Maneuver...
Need help?
Do you have a question about the R16 5TH and is the answer not in the manual?
Questions and answers