Install Cassette (Landed Wires) - ABB Emax 2 Installation And Maintenance Manual

Direct/cic replacement of legacy ge ak 600a - 4000a circuit breakers used in akd-5 & substructures

Hide thumbs Also See for Emax 2:

Table of Contents

Install Cassette (Landed Wires)

Danger



Ensure only qualified personnel install, operate, service and maintain all electrical

equipment.

Fig 53 shows the front view of the AKD-5 cassette, ready for installation

Figure 52 & 53

Figure 54

2TSA451011P0000 Rev-B

Fig 52. Cassette Projected from Switchgear

Switchgear and Cassette assembly (Front View)



It must be ensured that the supply power to

the

compartment

compartment is de-energized for all the

incoming and outgoing circuits of the LVS

prior to any work being conducted on it.



During the installation and related work on

the equipment, it must be ensured that the

operator is using the prescribed PPE for the

specified tasks.

AKD-5, AK50

Fig 53. Cassette racking on Switchgear rails

turned

off/

Table of Contents

Legacy ge ak 600a Legace ge ak 4000a