Customize Retrofill Secondary Wiring - ABB Emax 2 Installation And Maintenance Manual
Direct/cic replacement of legacy ge ak 600a - 4000a circuit breakers used in akd-5 & substructures
Hide thumbs
Also See for Emax 2:
Table of Contents
Advertisement
Customize retrofill secondary wiring
Notice
26| © 2020 Emax 2 Retrofill Circuit Breakers 600A-4000A
WIRING
Before installing the breaker, the secondary
disconnects must be wired to the Emax 2 Retrofill
Breaker.
Wires with wire markers are provided on the
Retrofill. Make sure that the switchgear wiring
connection points match up with the original
wiring of the cubicle. This ensures that all wiring
connections are properly made.
Wrong connections will cause the breaker to
malfunction.
2TSA451011P0000 Rev-B
Advertisement
Table of Contents
