Setup And Operation - Snailax SL-593G Use & Care Manual

Setup and Opera�on
1. Please put the product on the flat floor.
2. Connect the adapter cable to the corresponding port on the foot massager.
3. Plug the home adapter into electrical outlet ( the adapter is safe to use with both 110-120V
& 220-240V )
4. Turn on the massage device through opera�ng control panel (instruc�ons on page 5)
• This device will switch off automa�cally a�er 15 minutes �mer run out.
• Do not setup or use the device in a bathroom or similary wet / damp areas.
• Before plug ,please check and make sure the power cord is undamaged.
• Do not use the wet hand to plug in the adapter.
• Please don't use the product by standing posture or put any heavy object on the
product to avoid any broken caused.
• Please don't stand or seat on the product .
• When moving the product, please don't pull the power cord or drag the product
directly to avoid any damaged caused.
• Please don't let children and pets play the products for preven�ng any accident
happened.
• Do not use the wet hand to pull out the power cord in order to avoid any electric shock.
• Do not use this product in damp environment to avoid electric shock.
3