Casio QT-6000 Training Manual page 51

Smart touch terminal

Hide thumbs Also See for QT-6000:

SETTING UP RF COMMUNICATIONS

Access Point that must be used

54 Mbps Wireless Access Point WG602

Wireless Card that must be used

32 – Bit Wireless PC Card SMC2835W Version 2

The communication between terminals is Ethernet with TCP/IP

The speed is 10/100Base-T/Tx for a wired Configuration

And .11g for RF communications the speed is 54Mbps

Please note the above access point and wireless card are the only

ones that can be used with the QT-6000 system.

Casio do not recommend or support any other type of equipment.

CHAPTER 9

Need help?

Do you have a question about the QT-6000 and is the answer not in the manual?