Casio QT-6000 Training Manual page 14

Follow the procedure below to load the IPL data to the QT-6000
(1) Insert the CF card into the top of the terminal
(2) Switch the terminal off and hold down the INIT switch the
terminal will then will ask you to push the INIT Switch again
to start the load of the IPL
(3) Press the INIT Switch and the IPL will start to load
(4) After the IPL has loaded the QT-6000 will ask for a Mac/Init
code enter 10000 for UK and then press "ok"
After you have entered 10000 the QT-6000 will come up with
the TCP/IP network screen. This screen is shown below
14