Download Print this page

Nav TV W212 VIM Quick Start Manual

Enables video in motion for factory dvd playback on 2010 and up e-class

Advertisement

Quick Links

100 NW 11
Enables video in motion for factory DVD playback
Enables video in motion for factory DVD playback on 2010 and up E
What's in the box
Video in Motion (VIM) filter
Video in Motion (VIM) filter
T-Harness
USB cable
Installation
1. Open the glove compartment to gain
Open the glove compartment to gain
access to (2) metal retention clips
located just behind the wood trim.
ocated just behind the wood trim.
Using a right angle pick tool, gently pull
Using a right angle pick tool,
down the retention clips to release the
down the retention clips to release the
locks on the back side of the wood grain
locks on the back side of the wood grain
trim.
2. Using a plastic pry tool, gently put
Using a plastic pry tool, gently put
pressure on the back side of the trim.
pressure on the back side of the trim.
DO NOT PRY OFF! With pressure
DO NOT PRY OFF! With pressure
applied, look inside the 2 center AC
applied, look inside the 2 center AC
vents. On either side will be a plastic
ither side will be a plastic
retention clip. Using a right angle pick
ion clip. Using a right angle pick
tool, carefully reach into the vents to
tool, carefully reach into the vents to
pull back each clip on either side to
clip on either side to
release the wood trim. Once released,
release the wood trim. Once released,
remove from vehicle.
3. The radio is held in by (2) T20 T
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
End user agrees to use this product in compliance with all State and Federal laws. NAV
Agreement
misuse of its product. If you do not agree, please d
intended for off-road use and passenger entertain
th
Street, Boca Raton, FL 33432 TEL 561-955-9770 FAX 561-955-9760
Street, Boca Raton, FL 33432
www.nav-tv.com
info@nav-tv.com
W212 VIM
ention clips
2) T20 Torx bolts
e, please discontinue use immediately and return product to place of purchas
entertainment only.
March 25, 2010
on 2010 and up E-Class
1 |
TV Corp. would not be held liable for
of purchase. This product is
Jack Randall
P a g e

Advertisement

loading

Summary of Contents for Nav TV W212 VIM

  • Page 1 Street, Boca Raton, FL 33432 Street, Boca Raton, FL 33432 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W212 VIM Enables video in motion for factory DVD playback Enables video in motion for factory DVD playback on 2010 and up E on 2010 and up E-Class What’s in the box...
  • Page 2 Jack Randall March 25, 2010 that are located on the top of the radio. are located on the top of the radio. Using an angled skew driver, loosen the Using an angled skew driver, loosen the screws all the way to release the radio. screws all the way to release the radio.