Related Manuals for Nav TV W222-VIM
Summary of Contents for Nav TV W222-VIM
- Page 1 3950 NW 120 Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 W222-VIM Video in Motion interface for ’14+ S-Class vehicles NTV-KIT618 08/19/15 NTV-DOC232...
- Page 2 NTV-DOC232 Overview The W222-VIM adds Video in Motion and Navigation Control in Motion to the 2014+ Mercedes S-Class. Installation is performed in the driver’s kick area, above the under-dash panel. This kit is not plug & play at this time.
- Page 3 08/19/15 NTV-DOC232 W222-VIM Installation 1. Installation is performed near the driver’s kick panel, above the under-dash panel (find red hood-release handle): Constant power can be found here, behind fuse panel 2. Drop the under-dash panel (Torx screws) to access the...
- Page 4 08/19/15 NTV-DOC232 3. Look for the only 3-pin connector, it will be on the end. This is the connector in which the CAN wires must be intercepted. Disconnect this plug. 4. Grab the provided Power/CAN harness, connect (splice) the black ground (-) wire to the brown ground wire in this plug.
- Page 5 3 and cut these wires in half. Leave enough room to solder to each side of each wire when doing this. 9. Solder the following wires in the proper direction to each cut wire: W222-VIM wire PIN # Connect to CAR’s Direction White/Blue...
- Page 6 11. Optional: Connect INPUT 1 (red) to a 12v source through a toggle for VIM activation. This connection is not necessary if the user wishes to use the OEM button for VIM Activation. 12. Proceed to ‘W222-VIM Operation’. Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
- Page 7 08/19/15 NTV-DOC232 W222-VIM Operation To enable Video in Motion, Press and HOLD the MUTE Button on right side of the steering wheel for 3 full seconds. The easiest way to test functionality is to: a. Play a video on the main screen while in park b.