Related Manuals for Nav TV NTV-KIT486
Summary of Contents for Nav TV NTV-KIT486
- Page 1 3950 NW 120 Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 14 Equus VIM ’14 Hyundai Equus Video in Motion NTV-KIT486 03/3/14 NTV-DOC168...
- Page 2 03/03/14 NTV-DOC168 Overview The Equus VIM enables video in motion on the 2014 Hyundai Equus. The system allows video playback of both DVD and video files on USB flash drive. Kit Contents Plug & Play T-Harness USB Cable (updates) Equus VIM Module NTV-HAR239-B NTV-CAB009 NTV-ASY171...
- Page 3 03/03/14 NTV-DOC168 2. With a plastic panel tool, pry up and remove the lower console panel that houses the radio control knob. Disconnect all harnesses and carefully pass the shifter knob through the wider portion of where the boot was seated: 3.
- Page 4 03/03/14 NTV-DOC168 Replace the push button to its original connector for testing. 4. Disconnect all harnesses from the dash panel removed in step 3. Remove the push- button Ignition switch by prying these release tabs: 5. Remove (2x) Phillips head screws securing the radio: 6.
- Page 5 03/03/14 NTV-DOC168 7. Remove (2x) Phillips screws that secure the lower dash pocket: 8. The lower dash pocket will be free now, pull straight out and up towards to, remove 3 connectors. 9. Remove (2x) 10mm nuts that secure the bottom half of the radio to the sub-dash: 10.
- Page 6 03/03/14 NTV-DOC168 Equus VIM installation 1. Connect the male end of the OEM 28-pin main radio power plug into the female side of the provided Plug & Play T-Harness. 2. Connect the Equus VIM module to the black 18-pin molex connector. 3.
- Page 7 03/03/14 NTV-DOC168 Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.