Remote Control; Input Buttons; Sound Field - Sony RHT-G800 Operating Instructions Manual

Remote control

Here describes the buttons for amplifier
operation only. See page 29 for the buttons for
operation of the connected components.
20
GB
A ?/1 (on/standby)
Press to turn the stand on or off.
To save the power in standby mode
Press ?/1 while the stand turns on. To
cancel standby mode, press ?/1 once.
B Input buttons
Press one of the buttons to select the
component you want to use. The buttons are
factory assigned to control Sony
components. You can program the remote to
control non-Sony components following the
steps in "Programming the remote for other
component" (page 26).
C C, X, x, c or
Press C, X, x or c to select the settings.
Then press to enter the selection.
D AMP MENU
Press to display the menu of the stand
(page 33).
E NIGHT
Press to activate the night mode function
(page 24).
F SLEEP
Press to activate the Sleep Timer function
and the duration which the stand turns off
automatically (page 40).
G 2 +/– - Volume
Press to adjust the volume.
H % Muting
Mutes the sound.
I SOUND FIELD
Press to select the sound field (page 23).
J TV (orange)
Press to operate the TV using the buttons
with an orange dot.
If you do not press the following button
within 60 seconds during registration, the
operation will become invalid.