Assembly; Joining The Monitor And The Control Unit - Sony BKM-37H Installation Manual

Assembly

Joining the Monitor and the Control
Unit
You can join a control unit to a monitor using the
attachment stand.
1
Remove the five legs from the bottom of the control
unit.
Control unit
2
Attach the right stand and left stand to the sides of the
control unit using four screws B (4 × 8).
Use two screws B for each stand.
Right stand
3
Remove the four legs from the bottom of the monitor
and the screws on the left and right sides from the rear
of the monitor.
Note
Place the monitor flat on a soft cloth.
4
Place the rear stay on the monitor and assemble using
two screws B (4 × 8).
Left stand
Screw B
Rear of the monitor
Screw B
Rear stay
15
Assembly