Mechanical Details; Environmental; Waste Removal Information; Conformity - Eaton Crouse-Hinds Series Instruction Manual

8
9
10
For more detailed information about take-back and equipment recycling please contact your
local Eaton MTL representative.
11
12
10

MECHANICAL DETAILS

Enclosure dimensions
Width
45mm
All values are approximate.
Mounting
• The 9661-ETW module will clip onto standard DIN Rail (TS35)
• Black plastic clips from the top and bottom of the module can be pulled out to
allow it to sit over the DIN Rail, the clips will then be pushed back into place to
secure the module.

ENVIRONMENTAL

Operating Temperature
Storage Temperature
Humidity
Ingress Protection

WASTE REMOVAL INFORMATION

The Electronic equipment within must not be treated as general waste. By
ensuring that this product is disposed of correctly, you will be helping to
prevent potentially negative consequences for the environment and human
health, which could otherwise be caused by incorrect waste handling of this
product.

CONFORMITY

Refer To 9600 Series Declaration of Conformity

MAINTENANCE

There is no routine maintenance required
Height Depth
147mm 155mm
-40°C...+70°C
-40°C...+70°C
0...95% RH, non-condensing
Select enclosure to suit application, see certificates
for information.
Weight
357g
INM 9661-ETW Rev 1