JVC KW-XC8 Service Manual page 8

KW-XC828
Removing the system control board /
switch board (See Fig.4 , 5)
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the twelve screws B retaining the system
control board.
2. Remove the five screws C
board.
3. Unsolder WR501 and WR502 of the wires
connecting the system control board with the switch
board.
1-4
retaining the switch
B
System control board
B
B
WR502
Switch board
WR502
Fig.4
System control board
C
WR502
Switch board
Fig.5
B
B
WR501
C
WR501