JVC KW-XC8 Service Manual page 10

KW-XC828
<CD player section>
Prior to performing the following procedure, remove
the front panel assembly, the CD player section and
the cassette player section.
Removing the main board (See Fig.11)
1. Remove the three screws J
board. The connector CN601 on the main board is
disconnected from the CD mechanism control board.
CAUTION: When reassembling, securely connect
connector CN601 on the main board to
the connector on the CD mechanism
control board.
Removing the MP3 board
Prior to performing the following procedure, remove
the main board.
1. Disconnect the wire from connector CN601on the
MP3 board.
2. Remove the five screws K
releasing the joint c and d.
Removing the CD mechanism assembly
Prior to performing the following procedure, remove
the main board and MP3 board.
1. Remove the three screws L
mechanism assembly.
1-6
attaching the main
(See Fig.12)
Joint c
and the MP3 board,
(See Fig.13)
attaching the CD
Main board
J
J
Fig.11
K
MP3 board
K
Fig.12
L
CD mechanism assembly
Fig.13
CN601
J
CN601
Joint d
L
L