Troubleshooting - KitchenAid 5K45 Series Use And Care Manual

Stand mixer
Hide thumbs Also See for 5K45 Series:
Table of Contents

Advertisement

CARE AND CLEANING
3
IMPORTANT: The Wire Whip is only
dishwasher-safe for models 5KSM200,
5KSM185, and 5KSM180. For all other
models: Wash it thoroughly in hot sudsy
water and rinse completely before drying.
Do not store Wire Whip on shaft.

TROUBLESHOOTING

Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
Problem
If Stand Mixer warms up
during use:
The Stand Mixer emits a
pungent odour:
If the Flat Beater hits the
Bowl:
If your Stand Mixer should fail
to operate, please check the
following:
If the problem cannot be
corrected:
10
W11555951C_01_EN.indd 10
W11555951C_01_EN.indd 10
WARNING
Electrical Shock Hazard
Heavy loads should not exceed Speed 2. Under heavy loads
with extended mixing time periods, you may not be able to
comfortably touch the top of the unit. This is normal.
This is common with electric motors, especially when new.
Stop the Stand Mixer. See the "Beater to Bowl clearance"
section and adjust the beater to bowl clearance.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the circuit
is closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it back
on. If the Stand Mixer still does not start, allow it to cool for
30 minutes before turning it back on.
See the "Terms of KitchenAid Guarantee ("Guarantee")"
section.
Do not return the Stand Mixer to the retailer; retailers do
not provide service.
Solution
07-10-2021 18:33:20
07-10-2021 18:33:20

Advertisement

Table of Contents
loading

Table of Contents