Electrical Requirements - KitchenAid 5K45 Series Use And Care Manual

Stand mixer
Hide thumbs Also See for 5K45 Series:
Table of Contents

Advertisement

PRODUCT SAFETY
9. The use of attachments not recommended or sold by KitchenAid may cause fire,
electrical shock or injury.
10. Do not use the Stand Mixer outdoors.
11. Do not let the cord hang over edge of table or counter.
12. Do not let the cord contact hot surfaces, including the stove.
13. Remove Flat Beater, Flex Edge Beater, Wire Whip, Dough Hook, or Pastry Beater
from Stand Mixer before washing.
14. Children should be supervised to ensure that they do not play with the appliance.
15. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
16. Never leave the appliance unattended while it is in operation.
17. To avoid product damage, do not use the Stand Mixer Bowls in areas of high
heat such as an oven, microwave, or on a stovetop.
18. Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
19. Refer to the "Care and Cleaning" section for instructions on cleaning the
surfaces in contact with food.
20. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, offices, or other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
Instructions are also available online, visit our website at:

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
4
W11555951C_01_EN.indd 4
W11555951C_01_EN.indd 4
www.KitchenAid.co.uk
or
www.KitchenAid.eu
Wattage:
300 W
For 5KSM125 - 5KSM200 Series
275 W
For 5K45, 5KSM45 - 5KSM100 Series
Voltage: 220-240 V~
Frequency: 50-60 Hz
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician.
Do not modify the plug in any way.
Do not use an adapter.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
07-10-2021 18:33:18
07-10-2021 18:33:18

Advertisement

Table of Contents
loading

Table of Contents