Sony STR-DB780 Operating Instructions Manual page 22

Hide thumbs Also See for STR-DB780:
Table of Contents

Advertisement

5: Setting up the speakers
(continued)
x SURROUND (
(Surround speaker size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the surround
speakers to "LARGE".
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other "LARGE" speakers.
• NO
If you did not connect surround speakers, select
"NO".
Tip
The LARGE and SMALL settings for each speaker
determine whether or not the internal sound processor
will cut the bass signal from that channel. When the
bass is cut from a channel, the bass redirection
circuitry sends the corresponding bass frequencies to
the sub woofer or other "LARGE" speakers.
However, since bass has a certain amount of
directionality, it best not to cut them, if possible.
Therefore, even when using small speakers, you can
set them to "LARGE" if you want to output the bass
frequencies from that speaker. On the other hand, if
you are using a large speaker, but prefer not to have
bass frequencies output from that speaker, set it to
"SMALL".
If the overall sound level is lower than you prefer, set
all speakers to "LARGE". If there is not enough bass,
you can use the equalizer to boost the bass levels. To
adjust the equalizer, see page 39.
GB
22
)
SL
SR
x SUB WOOFER (
(Sub woofer selection)
• YES
If you connect a sub woofer, select "YES".
• NO
If you did not connect a sub woofer, select
"NO". This activates the bass redirection
circuitry and outputs the LFE signals from other
speakers.
Tip
In order to take full advantage of the Dolby Digital
bass redirection circuitry, we recommend setting the
sub woofer's cut off frequency as high as possible.
For advanced speaker setups
Use the CUSTOMIZE menu and set "MENU"
to "MENU EXP." This enables advanced
setups including those of the distances to the
speakers and heights of the speakers.
For details on "MENU", see page 40. For
details on how to set the items, see page 41.
)
SW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents