Vestil CB-S-2S Quick Start Manual

Table of Contents
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
To order replacement parts, labels, and accessories, contact the technical service and parts
department online at
replacement parts and/or service by calling (260) 665-7586 and asking for the Parts Department.
Signal Words.........................................................................................................................
Safety Instructions...................................................................................................................
Exploded View and Bill of
Inspections and Maintenance....................................................................................................
Labeling Diagram............... ............................................................................................................
Limited Warranty....................................................................................................................
Table of Contents
Rev. 2/10/2020
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web: www.vestilmfg.com
CB-S-2S
http://www.vestilmfg.com/parts_info.htm.
Table of Contents
Materials..............................................................................................
Copyright 2020 Vestil Manufacturing Corp.
Vestil Manufacturing Corp.
Fax: (260) 665-1339
Alternatively,
CB-S-2S MANUAL
e-mail: info@vestil.com
you may request
Page 1 of 5
2
2
3
4
4
5