Table of Contents
Advertisement
Flexi-Heat
This function allows you to adjust the
temperature by moving the cookware to a
different position on the induction cooking
area.
The function divides the induction cooking
area into three areas with different heat
settings. The hob detects the position of
the cookware and adjust the heat setting
corresponding with the position. You can
place the cookware in the front, middle or
rear position. If you place the cookware in
the front you get the highest heat setting.
To decrease it, move the cookware to
middle or rear position.
Use only one pot when you
operate the function.
General information:
• 160 mm is the minimum bottom
diameter of the cookware for this
function.
• Heat setting display for the left rear
control bar shows the position of the
cookware on the induction cooking
area. Front
• Heat setting display for the left front
control bar shows the heat setting. To
change the heat setting use left front
control bar.
• When you activate the function for the
first time you will get heat setting
for the front position,
position and
You can change the heat settings for
each position separately. The hob will
remember your heat settings next time
you activate the function.
Activating the function
To activate the function place the
cookware in the correct position on the
cooking area. Touch
above the symbol comes on. If you do not
place the cookware on the cooking area
comes on and after 2 minutes the
flexible induction cooking area is set to
Deactivating the function
To deactivate the function touch
the heat setting to
the symbol
goes off.
, middle
, rear
for the middle
for the rear position.
. The indicator
. The indicator above
15
.
.
or set
Advertisement
Table of Contents
