Elo TouchSystems 4243L User Manual page 19

Real Time Clock Function
For touch displays with the RTC function installed, the "Miscellaneous" section of the OSD menu will have RTC
settings. Here you can use the OSD buttons to allow adjustment of the additional display parameters:
Parameter Available Adjustment
Allows time to be changed by one hour to accommodate for daylight savings time change.
Daylight Savings Time
Default: Off
Allows time to be set in the 24-hour format of HH:MM:SS. The date can be set in the format of MM-DD-YYYY.
Time Setting
Default: On
Enable/disable scheduling to automatically turn on/off the touch display. The on/off time can be set in a 24-hour format of HH:MM.
Schedule
You can schedule which days the touch display will turn on/off by selecting each day with the OSD remote.
If prompted to set current time, the RTC schedule will be automatically be enabled to turn off at 1:00:00AM and turn
on at 7:00:00AM. This option can be turned off manually in the OSD menu under RTC settings.
Temperature Warning
The touch display contains a temperature sensor that can monitor the system temperature. If the touch display is
operated outside the specified temperature range, it will go into Thermal Protection mode. In this mode, the
brightness will be reduced in order to bring the system temperature back within the specified temperature range. The
brightness will not be able to be increased beyond the set value. After five minutes of use within the normal
temperature range, the touch display will automatically restore the brightness level back to what it was set at
previously. If the touch display is continuously operated outside the specified temperature range, it will shut off after
a 60 second on-screen timer.
User Manual – 32/42/43/5543L Series IDS
SW601960 Rev. G, page 19 of 31