Texas Instruments TLC5929 User Manual
Texas Instruments TLC5929 User Manual

Texas Instruments TLC5929 User Manual

Using 16-channel led driver with 7-bit global brightness control, power-save mode, and full self-diagnosis for leds

Advertisement

Quick Links

Using the TLC5929, 16-Channel LED Driver with 7-Bit
Global Brightness Control, Power-Save Mode, and Full
The Texas Instruments TLC5929 evaluation module (EVM) is a fully assembled and tested circuit for
evaluating the TLC5929, a 16-channel, constant-current LED driver with 7-Bit Global Brightness Control,
Power-Save Mode, and Full Self-Diagnosis for LEDs. The EVM is capable of driving up to 50 mA per
channel when powered from a 5-V supply.
1
1.1
1.2
1.3
2
3
4
4.1
4.2
4.3
5
5.1
5.2
6
7
1
TLC5929 EVM Schematic
2
3
4
5
1
2
3
4
SLVU756 - August 2012
Submit Documentation Feedback
..................................................................................................................
..........................................................................................................
.........................................................................................................
.............................................................................................................
.................................................................................................
..................................................................................
..........................................................................................................
...................................................................................................
............................................................................................
..................................................................................................................
...........................................................................................................
...................................................................................................
.............................................................................................................
.................................................................................................
......................................................................................................
......................................................................................................
..............................................................................................................
Using the TLC5929, 16-Channel LED Driver with 7-Bit Global Brightness
Copyright © 2012, Texas Instruments Incorporated
Self-Diagnosis for LEDs
Contents
.................................................................
........................................................................
List of Figures
............................................................................
..........................................................
........................................................................
................................................................
List of Tables
............................................................
Control, Power-Save Mode, and Full Self-Diagnosis for LEDs
User's Guide
SLVU756 - August 2012
2
2
2
2
2
3
4
4
5
5
6
6
6
8
9
3
7
8
8
9
2
4
5
9
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TLC5929 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments TLC5929

  • Page 1: Table Of Contents

    Global Brightness Control, Power-Save Mode, and Full Self-Diagnosis for LEDs The Texas Instruments TLC5929 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TLC5929, a 16-channel, constant-current LED driver with 7-Bit Global Brightness Control, Power-Save Mode, and Full Self-Diagnosis for LEDs. The EVM is capable of driving up to 50 mA per channel when powered from a 5-V supply.
  • Page 2: Introduction

    Illumination • LED Video Displays Features • EVM printed circuit board (PCB) assembled with the TLC5929 LED Driver • (current reference) for operation of 10, 20, 30, 40, or 50 mA per channel (selectable through jumpers). • 2 × 16 output header for connecting though-hole LEDs (LEDs not included) or the white LED board,...
  • Page 3: Tlc5929 Evm Schematic

    Table 4 for Specific Values Figure 1. TLC5929 EVM Schematic SLVU756 – August 2012 Using the TLC5929, 16-Channel LED Driver with 7-Bit Global Brightness Control, Power-Save Mode, and Full Self-Diagnosis for LEDs Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated...
  • Page 4: Connector And Test Point Descriptions

    Serial Connector (J2) Evaluation of the series connection of several TLC5929 is possible with this EVM. Connect J1 of the second EVM with the serial connector, J2, of the first EVM. The signals BLANK (pin 7), SCLK (pin 9), LAT (pin 8), and GND (pin 6) of the first EVM are directly connected to the second EVM.
  • Page 5: Iref

    4.3.1 Input Voltage Monitoring (TP5, TP8, TP9, TP10) The TLC5929 EVM provides test points for measuring the voltage applied to the IC and the LEDs. This allows measurement of the actual supply voltages without losses from input cables and connectors.
  • Page 6: Test Set Up

    SIN (pin 10 or TP3), SCLK (pin 9 or TP2), LAT (pin 8 or TP1), and GND (pin 6 or TP10). Equipment Setup Figure 2 shows the basic test set up recommended to evaluate the TLC5929 EVM. Note that although the return for J5 and J6 are the same system ground, the connections should remain separate as shown in Figure 5.2.1...
  • Page 7: Tlc5929 Evm Recommended Test Set-Up

    5V Figure 2. TLC5929 EVM Recommended Test Set-Up SLVU756 – August 2012 Using the TLC5929, 16-Channel LED Driver with 7-Bit Global Brightness Control, Power-Save Mode, and Full Self-Diagnosis for LEDs Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated...
  • Page 8: Tlc5929 Evm Assembly Drawings And Layout

    This allows viewing, probing, and evaluation of the TLC5929 LED control IC in a practical double-sided application. Moving components to both sides of the PCB or using additional internal layers offers additional size reduction for space-constrained systems.
  • Page 9: List Of Materials

    IC, 16 Channel Constant-Current LED Driver with SSOP-24 TLC5929DBQ LED Open Detection SLVU756 – August 2012 Using the TLC5929, 16-Channel LED Driver with 7-Bit Global Brightness Control, Power-Save Mode, and Full Self-Diagnosis for LEDs Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated...
  • Page 10 Any exceptions to this are strictly prohibited and unauthorized by Texas Instruments unless user has obtained appropriate experimental/development licenses from local regulatory authorities, which is responsibility of user including its acceptable authorization.
  • Page 11 FCC Interference Statement for Class B EVM devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 12 Also, please do not transfer this product, unless you give the same notice above to the transferee. Please note that if you could not follow the instructions above, you will be subject to penalties of Radio Law of Japan. Texas Instruments Japan Limited (address) 24-1, Nishi-Shinjuku 6 chome, Shinjuku-ku, Tokyo, Japan http://www.tij.co.jp...
  • Page 13 FDA Class III or similar classification, then you must specifically notify TI of such intent and enter into a separate Assurance and Indemnity Agreement. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated...
  • Page 14 Any exceptions to this are strictly prohibited and unauthorized by Texas Instruments unless user has obtained appropriate experimental/development licenses from local regulatory authorities, which is responsibility of user including its acceptable authorization.
  • Page 15 FCC Interference Statement for Class B EVM devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 16 Also, please do not transfer this product, unless you give the same notice above to the transferee. Please note that if you could not follow the instructions above, you will be subject to penalties of Radio Law of Japan. Texas Instruments Japan Limited (address) 24-1, Nishi-Shinjuku 6 chome, Shinjuku-ku, Tokyo, Japan http://www.tij.co.jp...
  • Page 17 FDA Class III or similar classification, then you must specifically notify TI of such intent and enter into a separate Assurance and Indemnity Agreement. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated...
  • Page 18 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.
  • Page 19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TLC5929EVM-118...

Table of Contents