Baxton Studio NEVES DAYBED Assembly Instructions page 3

STEP 1
A
1
· Driving the Mini fix (5) into Headboard (A) and attach the Back panel (C) to Headboard (A) carefully.
Insert the housing (6) into the hole of Back panel (C) then tightening securely.
· Attach the side rail (D&E) to the Headboard (A) by tightening the JCBB M8 x 16mm (1) securely.
· Only tighten when all the hardware are in position.
STEP 2
1
· Driving the Mini fix (5) into Footboard (B) and attach the Back panel (C) to Headboard (A) carefully.
Insert the housing (6) into the hole of Back panel (C) then tightening securely.
·
Attach the side rail (D&E) to the Headboard (A) by tightening the JCBB M8 x 16mm (1) securely.
· Only tighten when all the hardware are in position.
ASSEMBLY INSTRUCTION
E
B
D
i)
D
i)
E
B
ii)
5
iii)
6
B
ii)
5
iii)
6
A
5
C
C
5
C
C