Webcasting; Mat - Idis DC-T4233HRX Operation Manual

Part 1 - Remote Setup

Webcasting

Use the webcasting service to view live images from the
camera on a web site.
• HTML Code: Copy and paste the html code shown on
the screen within the code of the web page you want
the video to be displayed.
• Stream: Choose a stream to use for webcasting. Only
a stream currently in use can be selected.
In order to use the webcasting service, the Allow
Anonymous Login option under System > User/
Group must be selected.
22

MAT

Select the MAT option to use the MAT (Motion Adaptive
Transmission) feature during video transmission and
recording.
• Sensitivity: Set the motion detection sensitivity.
Higher values will result in more sensitive motion
detection.
• Inactivity Period: Set the Inactivity Period. If motion
is not detected for the duration of time specified,
video is transmitted and recorded using the frame
rate designated below until movement is detected
again.
• Frame Rate: Designate the frame rate to be used
between the end of the Inactivity Period and the next
motion detection. When the slow shutter mode is
enabled under Video > Camera menu, the fame rate
may change. Video is transmitted and recorded at
the designated frame rate between then end of the
Inactivity Period and the next motion detection. Once
motion is detected again, the frame rate designated
under Streaming is restored immediately.
MAT (Motion Adaptive Transmission) is a feature
that lowers the frame rate when motion is not
detected to reduce the load on the network and save
on storage space. Based on the specified sensitivity
setting, no movement will be assumed if there is no
change between two consecutive images.