Sony BDV-Z7 Operating Instructions Manual page 76

3
If your ISP has a specific proxy server
setting, press X/x to select [Proxy
Settings], then press
The [Proxy Settings] display appears.
If the proxy server does not have a specific
setting, go to step 8.
4
Press X/x to select [Use of Proxy
Server], then press
5
Press X/x to select [On], then press
.
6
Select [Proxy Server] and [Port], and
enter the settings.
To enter the proxy server, see "To enter
characters" (page 76).
7
Press RETURN.
8
Press X/x to select [Network
Diagnostic], then press
9
Press C/c to select [Start], then press
.
10
Check that the message [Network
connections are correct.] appears.
The setup is finished. If the message does
not appear, follow the on-screen messages.
To enter characters
The display for entering characters appears
when you select [Proxy Server] in [Proxy
Settings].
Proxy Server Entry
Space 0
Letter Type
1
Press the number button repeatedly to
select a character.
Example:
Press the number 3 button once to enter [D].
Press the number 3 button three times to
enter [F].
2
Press c, and enter the next character.
76
GB
.
.
.
Clear
Clear All
Cancel
Symbol Finish
3
Press the blue button ([Finish]) to
finish.
You can use the following buttons to enter
characters.
Buttons Details
Red button Switches the keyboard between
[Letter Type] alphabet and numbers.
Green button Switches the keyboard between
[A/a] upper case and lower case.
Yellow button Displays the keyboard for
[Symbol] symbols.
Blue button The input is entered, and the
[Finish] system returns to the previous
display.
CLEAR Erases the character to the right
[Clear]/[Clear All] of the cursor.
To erase all displayed characters,
press and hold CLEAR for 2
seconds or more.
RETURN Returns to the previous display,
[Cancel] canceling the input.
C/X/x/c,
• Select an input function using
C/X/x/c, and press
• Enter characters as follows:
1Select a character selection
panel using C/X/x/c, and press
. 2Select a character using
C/c, and press
.
.