[Network Update] - Sony BDV-Z7 Operating Instructions Manual

5
Press X/x to select a setting, then
press .
The setting is selected and setup is
complete.
The options for the selected item appear.
Example: [4:3]
Setup
TV Type
Set the screen aspect ratio of your TV.
Screen Format
DVD Aspect Ratio
Cinema Conversion Mode
4 : 3
Original
Letter Box
Auto
Selected setting

[Network Update]

You can update and improve the functions of the
system.
For information about update functions, refer to
the following website:
http://support.sony-europe.com/
Note
• Do not disconnect the AC power cord (mains lead) or
network cable while downloading or updating
software.
• All operations, including opening the disc tray, are
disabled while updating.
• Downloading times may differ depending on the
server provider or line status.
• When error messages on network connections
appear, check the network connections using
[Network Diagnostic] of [Internet Settings] in
[Network Settings] (page 75).
Tip
• The "UPDATE */9" counter ("*" indicates update
step) in the front panel display also shows progress of
the update.
• You can check the current software version by
selecting [System Information] in [System Settings]
(page 75).
• The [Setup] settings remain after updating.
• The system informs you of newer software version
information when [Software Update Notification] is
set to [On] (default) (page 75).
Updating the system's
software using the network
1
Press X/x to select [Network Update],
then press .
The system connects to the network, and the
display asks for confirmation.
2
Press C/c to select [OK], then press
.
The system starts downloading, then
updating the software automatically.
When updating finishes, "COMPLETE!"
appears for 5 seconds in the front panel
display, then the system automatically turns
off.
67
GB